Complete AC battery storage for existing and new homes
MARSTEK VENUS E 3.0 combines a 5.12 kWh LFP battery, bidirectional AC inverter, BMS, smart controls and backup output in one enclosure. No separate battery inverter is needed.
AC coupling is ideal for retrofitting storage to existing solar: the original PV inverter can remain while VENUS E 3.0 manages charging and later use according to household demand, time or tariff.
Benefits
use more solar energy in the evening and at night
charge during low-cost periods and discharge when electricity is expensive
fast backup for selected circuits
expand with additional units as demand grows
open integration with smart energy management
Key specifications
5.12 kWh LiFePO4, 51.2 V / 100 Ah
integrated 2.5 kW bidirectional AC inverter
800 W / 2.5 kW grid output
2.5 kVA backup, 3.5 kVA peak for 10 seconds
over 6,000 cycles, 90% depth of discharge
over 93.5% battery-to-AC efficiency, IP65
Wi-Fi, RS485 and open EMS API
up to three units / 15.36 kWh in a single-phase system
480 × 153 × 624 mm, 60 kg
Backup, parallel and multi-phase designs require a qualified electrician. The unit is not a direct DC solar inverter for PV panels.
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
MARSTEK VENUS E 3.0 – 230 V home battery with inverter, 5.12 kWh / 2.5 kW
5.12 kWh LFP home battery with an integrated 2.5 kW bidirectional 230 V inverter. AC coupling makes it practical to add storage to existing solar without replacing its PV inverter.
* Required fields
Review sent
Your comment has been submitted and will be available once approved by a moderator.
5.12 kWh LFP home battery with an integrated 2.5 kW bidirectional 230 V inverter. AC coupling makes it practical to add storage to existing solar without replacing its PV inverter.