A true all-in-one solar storage system for balconies and smaller homes
MARSTEK VENUS A combines an LFP battery, four MPPT controllers, AC inverter, BMS, smart controls and backup output. PV modules connect directly, so the system does not require a separate solar or battery inverter.
Four independent PV inputs make it easier to use panels with different orientation or shading. A supported smart meter follows household demand and helps limit exports.
Why VENUS A
complete small solar and battery system in one platform
direct connection of up to four PV groups
energy use during the day, evening and outages
capacity expansion up to 12.72 kWh
quiet operation and IP65 protection
Key specifications
2.12 kWh LiFePO4, 41.6 V, over 6,000 cycles
up to 2.4 kW PV input, four independent MPPTs, 16–60 V
up to 20 A per MPPT, 99.8% MPPT efficiency
1.5 kVA AC input, 800 VA / 1.5 kVA grid output
1.5 kVA backup output
0–5 expansion modules, 2.12–12.72 kWh total
Wi-Fi, Bluetooth, Ethernet, below 30 dB
IP65, −20 to +60 °C, 450 × 340 × 220 mm, 27 kg main unit
PV configuration, metering, grid and backup connections must comply with local regulations and the electrical installation.
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
MARSTEK VENUS A – all-in-one battery with inverter and 4 MPPT, 2.12–12.72 kWh
Battery, solar control, grid inverter and backup in one unit. VENUS A accepts up to 2.4 kWp of PV through four independent MPPTs and expands from 2.12 to 12.72 kWh.
* Required fields
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Battery, solar control, grid inverter and backup in one unit. VENUS A accepts up to 2.4 kWp of PV through four independent MPPTs and expands from 2.12 to 12.72 kWh.